High Impact Crusher Backing (HICB) Supplier, Suppliers, Supply, Supplies Megapoxy ~ EIE Industrial Products Sdn Bhd

EIE Industrial Products Sdn Bhd
16, Jalan TS 6/9,
Taman Industri Subang,
47510 Subang Jaya,
Selangor, Malaysia.

+603-5637 1616

+603-5635 9833

High Impact Crusher Backing (HICB)

HICB.pdf (237.22 KB)

Megapoxy High Impact Crusher Backing is a two component pourable epoxy grout suitable for:

Description

Part “A” is a white low viscosity liquid and is packed in a re-sealable plastic bucket.

Part “B” is a blue coloured liquid and is packed in a screw capped plastic bottle.

Accelerator is a clear brown liquid and is packed in a 250 ml. tin.

Method of Use

Seal all crevices with putty (such as Megapoxy PF Rapid set putty) so that backing mixture does not leak out.
Make certain no settling has occurred in the resin by stirring, then add the hardener (Part “B”) slowly with continual mixing.
Using low speed electric drill, mix well, but do not aerate.
Mix until uniform colour is obtained.
The mixture must be used immediately after mixing.
If ambient temperature is high, the kits should be stored in as cool a place as possible. High ambients will lead to greatly shortened usable life.
If topping up is required, then this can be carried out at a later date when it is convenient.
If adhesion is not required, one or both surfaces should be coated with wax or grease based release agent.
Allow Megapoxy HICB to harden before returning crusher into service.

Please leave your enquiry here, we will reply as soon as possible.
Name*
Company Name
Product Interested
Quantity
Email*
Contact No.*
Messages*